RAM Booting menu
This menu is not supported.
Flash ROM menu
It programs onchip flash of MCU with user program only for single-application bootloader configuration.
Note that the monitoring of easyDSP is temporarily paused.
Please follow below sequence.
step 1 : Select the flash array and row to be erased. Use 'All', 'None', 'Used', 'Not Used' buttons.
step 2 : If bootloader security key is used, please input the key value after clicking 'Use security key' button.
step 3 : When the buttons (Erase, Erase+Program, Verify) are clicked first time, MCU enters to bootloader mode after reset.
Also silicon ID, selicon revision, bootloader version is displayed in the title bar.
step 4 : Execute necessary flash actions.
step 5 : Click 'Start User Program' button when exiting this dialog box. It makes MCU reset and user program starts.
note : erasing the flash where bootloader program is located is not enabled.