RAM Booting menu
This menu is not supported.
Flash ROM menu
It programs onchip flash or MRAM of MCU with user program during its development. OTP area is not supported.
Note that flash programming is not supported for RA0 series.
Note that the programming would be not available in case security or protection is set to the memory or DLM and AL value is not proper.
When clicked, the monitoring of easyDSP is temporarily paused and dialog will be present as below.
Please follow below sequence.
step 1 : Select the flash sector to be erased. Use 'All', 'None', 'Used', 'Not Used' buttons. Or click the checkbox of sectors.
All the sectors used in the user program are selected with 'Used' button. The other way around with 'Not used' button.
'Freeze' checkbox disables the sector selection. 'Show selected' shows only selected sectors in the list.
Note that erasing of option flash and MRAM is not performed since it is not necessary.
step 2 : When the buttons (Erase, Program+Verify, Verify) are clicked first time, MCU enters to bootmode after reset.
For the MCU which requires ID code to enter boot mode, please input ID code before entering boot mode.
Please note that easyDSP doesn't support any protected MCU.
step 3 : Execute necessary flash actions.
step 4 : Click 'Reset>Exit' button when exiting this dialog box. It makes MCU reset and user program starts.
