RAM Booting menu
This menu is not supported.
Flash ROM menu
It programs onchip flash of MCU with user program except the protected area by area protection or trusted memory.
If boot mode ID code protection is enabled in the MCU, MCU enters to boot mode only when ID code you input matches.
Therefore please disable any flash related protection feature in the MCU while using this menu.
When this menu is activated, the monitoring of easyDSP is temporarily paused.
Please follow below sequence.
step 1 : Select the flash sector to be erased. Use 'All', 'None', 'Used', 'Not Used' buttons.
step 2 : When the buttons (Erase, Program+Verify, Verify) are clicked first time, MCU enters to bootmode after reset.
step 3 : Execute necessary flash actions.
step 4 : Click 'Reset>Exit' button when exiting this dialog box. It makes MCU reset and user program starts.
If you set the ID code like below in the Smart Configurator, please set the ID code in the flash dialog as above.
Note :
1. All the flash contents are erased before entering to boot mode if the control ID is neither 0x45 nor 0x52 for RX100 and RX200 MCU series.
2. For RX64M, RX660, RX66T, RX71M and RX72T series, programming of option setting memory is not supported.
